OneTripCalc Measure once · Buy once My Project
Ten categories · 47 calculators

Calculate it here.
Buy it once.

Most calculators hand you a number and send you to the store guessing. Ours hand you a shopping list — the exact gallons, boxes, and bags to buy, waste included — so one trip is all it takes.

Shopping list, not just a number Imperial & metric, converted in place Results update as you type

Browse by category

Ten groups of calculators — pick one to see everything in it.

20 calculators

Home & DIY

Paint, tile, concrete, lumber and more — every calculator ends in a shopping list of what to buy.

PaintTileConcrete Browse Home & DIY
3 calculators

Money math

Loans, savings goals, and pay — plain arithmetic for everyday money questions, shown step by step.

Loan PayoffSavings GoalHourly-to-Salary Browse Money math
3 calculators

School & Grades

Weighted grades, student groups, and rubric scores — for students checking a grade and teachers alike.

Weighted GradeGroup MakerRubric Points Browse School & Grades
3 calculators

Cooking & kitchen

Scale a recipe up or down, time a roast, and work in baker's percentages — kitchen math that ends in a list.

Recipe ScalerRoast TimeBaker's % Browse Cooking & kitchen
3 calculators

Health & body

Calorie needs, running pace, and daily water — every result is an estimate, and each page says so plainly.

Calorie NeedsRunning PaceWater Intake Browse Health & body
3 calculators

Garden & outdoors

Soil for raised beds, plant spacing, and fertilizer coverage — figured from your bed, your spacing, your bag.

Raised Bed SoilPlant SpacingFertilizer Browse Garden & outdoors
3 calculators

Car & travel

What a trip costs in fuel, how two tire sizes really compare, and what an EV charge costs — before you leave.

Trip Fuel CostTire SizeEV Charging Browse Car & travel
3 calculators

Pets

Dog and cat food portions and crate sizing — estimates that start from your pet and your food's own label.

Dog FoodCat FoodCrate Size Browse Pets
3 calculators

Home energy

What each appliance costs you to run, ranked in one list — and what switching to LED bulbs actually saves.

Appliance CostEnergy ListBulb Savings Browse Home energy
3 calculators

Dates & time

Days between two dates, workdays with weekends excluded, and exact ages — figured on your own calendar.

Days BetweenWorkdaysAge Calculator Browse Dates & time

Most used

The calculators people reach for most, from across every category.

How every calculator works

STEP 1

Type your measurements

Pick inches, feet, yards, millimeters, centimeters, or meters on any tool — switching converts what you typed in place. Nothing gets wiped.

STEP 2

Set your waste margin

Every job wastes some material on cuts, spills, and mistakes. The waste slider is set to a sane default and shown openly — no hidden padding.

STEP 3

Take the list to the store

Results update as you type and round up to whole gallons, boxes, and bags. Open the shopping list, copy it or save it, and buy it all in one trip.

Please note: results on this site are planning estimates to help you buy the right amount of material. They are not structural engineering or building-code advice — for load-bearing work, permits, or anything an inspector will sign off on, check your local code and a licensed professional.

Home & DIY

Paint, tile, concrete, lumber and more — all 20 calculators in this category end in a shopping list.

Paint Calculator

Room size, wall height, doors and windows, coats, and ceiling — get gallons of paint and primer that actually cover the job.

You buy: gallons of paint + gallons of primer Open calculator

Square Footage Calculator

Add as many rooms as you have — rectangles, L-shapes, circles, and triangles — and get one total to plan materials against.

You get: total area per room + project total, waste included Open calculator

Tile Calculator

Area, tile size, and grout gap in — tiles and boxes out, plus the grout and thinset most people forget until trip two.

You buy: boxes of tile + grout + thinset bags Open calculator

Flooring Calculator

For laminate, hardwood, and vinyl plank: room area and box coverage become the box count — plus underlayment, so the floor can actually go down.

You buy: boxes of flooring + underlayment rolls Open calculator

Concrete Calculator

Slabs, footings, and post holes: volume in cubic yards for a truck order, or the bag count if you're mixing it yourself.

You buy: cubic yards ready-mix, or 60 lb / 80 lb bags Open calculator

Drywall Calculator

Walls and ceiling, sheet size in — sheets out, plus the screws and joint compound that finish the job.

You buy: drywall sheets + screws + joint compound Open calculator

Wallpaper Calculator

Room size, roll size, and pattern repeat become a roll count that accounts for matching the pattern at every strip.

You buy: rolls of wallpaper + paste Open calculator

Carpet Calculator

Broadloom by the square yard from a 12 or 15 ft roll, or carpet tiles by the box — plus padding either way.

You buy: square yards or tile boxes + padding rolls Open calculator

Mulch Calculator

Bed size and depth become cubic yards for bulk delivery, or the bag count if you're hauling it yourself.

You buy: cubic yards bulk, or 2 / 3 cu ft bags Open calculator

Bulk Material Calculator

Gravel, sand, topsoil, or crushed stone: area and depth become cubic yards and tons for the delivery order.

You buy: cubic yards + tons, delivered Open calculator

Paver Calculator

Patio or walkway area, paver size, and joint spacing — pavers out, plus the gravel and sand base underneath.

You buy: pavers + gravel base + bedding sand Open calculator

Fence Calculator

Fence length and post spacing become posts, pickets, rails, and the concrete bags that set every post.

You buy: posts + pickets + rails + concrete bags Open calculator

Deck Calculator

Deck size, board width, and joist spacing become deck boards, joists, and the screw count to fasten it all.

You buy: deck boards + joists + deck screws Open calculator

Roofing Calculator

Footprint, pitch, and overhang become true roof area — squares, shingle bundles, and underlayment rolls.

You buy: shingle bundles + underlayment rolls Open calculator

Stair Calculator

Total rise, riser height, and tread depth become riser and tread counts, total run, and stringer length — with comfort ranges flagged.

You get: risers, treads, run + stringer boards Open calculator

Stud & Framing Calculator

Wall length, on-center spacing, and openings become stud counts — plus the top and bottom plates to frame it.

You buy: studs + plate boards Open calculator

Board Foot Calculator

Thickness, width, length, and piece count become board feet — with an optional price per board foot for the total.

You get: board feet + estimated lumber cost Open calculator

Baseboard & Trim Calculator

Room perimeter minus the doors and openings, divided by stock length — the piece count to buy, waste included.

You buy: pieces of baseboard / trim stock Open calculator

Grout & Backsplash Calculator

Backsplash area, tile size, and joint width become tile boxes and grout bags sized for small wall tiles.

You buy: tile boxes + grout bags + mastic Open calculator

Insulation Calculator

Attic or wall area becomes batt packages by coverage, or blown-in bags for your target R-value.

You buy: batt packages or blown-in bags Open calculator

Money math

Loan payoff, savings goals, and pay conversion — plain arithmetic, shown step by step. Estimates and general math only, not financial advice.

School & Grades

Weighted grades, random student groups, and rubric point conversion — with printable lists you can take to class.

Cooking & kitchen

Scale a recipe to the servings you need, time a roast from standard guidance, and convert a bread formula to baker's percentages — each one ends in a list you can cook from.

Health & body

Calorie needs, running pace, and daily water intake. Every number here is an estimate from a standard formula — useful for planning, not medical advice.

Garden & outdoors

Soil for raised beds, how many plants fit at your spacing, and fertilizer bags figured from the coverage printed on your own bag — not a guessed standard.

Car & travel

Fuel cost for a trip, an honest side-by-side of two tire sizes, and what it costs to charge an EV — figured from your car's own numbers.

Pets

Daily food portions for dogs and cats and a crate sizing guide. Portions are estimates — your food's own label and your vet have the final word.

Home energy

What an appliance costs to run, a ranked list of everything in your home, and the yearly savings from switching bulbs to LED — all from watts, hours, and your rate.

Dates & time

Days between two dates, workdays with weekends (and holidays) taken out, and an exact age in years, months, and days — all figured on your own device's calendar.

Paint Calculator

Enter the room, subtract the doors and windows, pick your coats — and get the gallons of paint and primer to buy, not just a coverage number.

Units
ft
ft
ft

Paint coverage: 1 gallon covers about 350 sq ft — the standard rate, already filled in for both paint and primer. Nothing to look up.

Use a different rate from your can
sq ft / gal
Paint the ceiling too?Same color assumed
10%

Covers roller loading, spills, and leftover paint for future touch-ups.

Your shopping list

3
gallons of paint to buy
2.65 gal exact, rounded up — plus primer below.
Wall area352 sq ft
Ceiling area120 sq ft
Minus doors & windows−51 sq ft
Paintable area (1 coat)421 sq ft
Total area to cover842 sq ft

Take to the store

  • Paint2 coats, waste included× 3 gal
  • Primer1 coat over the paintable area× 2 gal

Updates as you type — no button to press.

The formula

Wall area = 2 × (length + width) × wall height
Paintable area = walls + ceiling (if on) − doors × 21 sq ft − windows × 15 sq ft
Gallons = paintable area × coats ÷ coverage × (1 + waste %)

Door and window sizes are standard planning figures (a door ≈ 21 sq ft, an average window ≈ 15 sq ft; 1.95 m² and 1.4 m² in metric). Primer is figured as one coat over the paintable area at the same coverage.

Worked example

A 12 × 10 ft bedroom with 8 ft walls, 1 door, 2 windows, ceiling painted, 2 coats, 350 sq ft per gallon, 10% waste:

Walls = 2 × (12 + 10) × 8 = 352 sq ft. Add the 120 sq ft ceiling, subtract 21 + 30 = 51 sq ft of openings → 421 sq ft paintable. Two coats = 842 sq ft ÷ 350 = 2.41 gal, × 1.10 waste = 2.65 → buy 3 gallons. Primer: 421 × 1.10 ÷ 350 = 1.32 → buy 2 gallons.

Related calculators

Estimate only: paint results are planning estimates based on the standard 350 sq ft per gallon rate (or the rate you set) — actual coverage varies with surface texture and condition. This is not structural or building-code advice.

Square Footage Calculator

The number every other project starts from. Add each room or area, pick its shape, and get a per-room breakdown plus one project total — with a waste margin for ordering material.

Units
10%

Applied to the “order for” figure only — the true measured total never changes.

Your total

168
total square feet
Across 2 areas.

Planning figures

  • Measured totalExact area of every room168 sq ft
  • Order material forTotal + 10% waste margin185 sq ft

Use this total in a calculator

Combined total: 168 sq ft. One tap opens a calculator with that area filled in — its own waste slider still applies there, so nothing is counted twice.

Updates as you type — no button to press.

The formulas

Rectangle = length × width
L-shape = (length A × width A) + (length B × width B)
Circle = π × (diameter ÷ 2)²
Triangle = (base × height) ÷ 2

An L-shaped room is just two rectangles sharing an edge — measure the long leg as one rectangle and the remaining leg as the second, making sure the corner isn't counted twice.

Worked example

An L-shaped living room: the main leg is 12 × 10 ft and the reading nook off it is 6 × 8 ft.

Main leg = 120 sq ft, nook = 48 sq ft → 168 sq ft total. With a 10% ordering margin, plan materials for 185 sq ft.

Related calculators

Estimate only: square footage results are planning estimates for buying material. They are not a survey, an appraisal measurement, or structural or building-code advice.

Tile Calculator

Area, tile size, and grout gap become a tile and box count — plus the grout and thinset that everyone forgets until the second trip.

Units
ft
ft
in
in
in

Estimate — box counts vary by brand and tile size. The exact count is printed on the side of the tile box; if yours differs, pick it above before you buy.

15%

Tile runs higher than other materials — cuts, breakage, and spares for future repairs. 10% for straight layouts, 15%+ for diagonal.

Your shopping list

14
boxes of tile to buy
136 tiles total, waste included.
Area to cover120 sq ft
Each tile covers (incl. grout)1.02 sq ft
Tiles needed136
Grout needed≈ 8 lb
Thinset needed≈ 120 sq ft of coverage

Take to the store

  • TileBoxes of 10 tiles× 14 boxes
  • Grout25 lb bag, sanded× 1 bag
  • Thinset mortar50 lb bag, ≈80 sq ft per bag× 2 bags

Updates as you type — no button to press.

The formulas

Tile + grout footprint = (tile length + gap) × (tile width + gap)
Tiles = area ÷ footprint × (1 + waste %), rounded up
Boxes = tiles ÷ tiles per box, rounded up
Grout ≈ joint volume (gap × ⅜ in deep) over the area
Thinset ≈ 1 × 50 lb bag per 80 sq ft

Grout and thinset are estimates — bag coverage varies by brand, trowel size, and tile thickness, so check the bag and round up when you're between bags.

Worked example

A 10 × 12 ft bathroom floor (120 sq ft) with 12 × 12 in tiles, a ⅛ in grout gap, 15% waste, 10 tiles per box:

Each tile with its grout joint covers 12.125 × 12.125 in = 1.02 sq ft. 120 ÷ 1.02 = 118 tiles, × 1.15 = 135.2 → 136 tiles → 14 boxes. Grout works out to about 8 lb → 1 × 25 lb bag; thinset 120 ÷ 80 = 1.5 → 2 × 50 lb bags.

Estimate only: tile, grout, and thinset results are planning estimates. Always verify against the coverage printed on the tile box and mortar bag. This is not structural or building-code advice.

Flooring Calculator

For laminate, hardwood, and vinyl plank. Room size and box coverage become the box count — plus underlayment, so installation day doesn't stall.

Units
ft
ft
in
in

Box coverage: about 20 sq ft per box is a common estimate and is already filled in. The exact coverage is printed on the end of the box — check it against your product before buying.

Use the coverage printed on your box
sq ft / box
10%

10% suits straight rooms; go 15% for diagonal layouts, stairs, or lots of closets and corners.

Your shopping list

10
boxes of flooring to buy
168 sq ft room, 185 sq ft with waste.
Room area168 sq ft
Area incl. waste185 sq ft
Each plank covers2.33 sq ft
Planks needed (est.)80

Take to the store

  • FlooringBoxes covering 20 sq ft each× 10 boxes
  • UnderlaymentRolls covering 100 sq ft each× 2 rolls

Updates as you type — no button to press.

The formula

Room area = length × width
Boxes = area × (1 + waste %) ÷ coverage per box, rounded up
Planks ≈ area incl. waste ÷ (plank length × plank width)
Underlayment rolls = area ÷ 100 sq ft per roll, rounded up

Underlayment is only needed for floating laminate and some vinyl installs — hardwood that's nailed or glued down doesn't use it. Skip that line if it doesn't apply to your floor.

Worked example

A 12 × 14 ft room (168 sq ft), boxes covering 20 sq ft, 10% waste, 48 × 7 in planks:

168 × 1.10 = 184.8 sq ft to cover ÷ 20 = 9.24 → buy 10 boxes. Each plank covers 2.33 sq ft, so expect to lay about 80 planks. Underlayment: 168 ÷ 100 = 1.68 → 2 rolls.

Related calculators

Estimate only: flooring results are planning estimates. Box coverage and plank counts vary by product — confirm against the box before you buy. This is not structural or building-code advice.

Concrete Calculator

Pick your shape — slab, footing, or post holes — and get the volume both ways: cubic yards for a ready-mix truck, or the bag count if you're mixing it yourself.

Units
Shape
ft
ft
in
10%

Ground is never perfectly level and forms bulge — running short mid-pour is the expensive mistake. 10% is the standard cushion.

Your order

1.36
cubic yards of concrete
1.23 yd³ exact, 10% margin included. Mixing by hand? See the bag counts.
Volume (exact)33.3 ft³ · 1.23 yd³
Volume (with margin)36.7 ft³ · 1.36 yd³
80 lb bags (0.6 ft³ each)62 bags
60 lb bags (0.45 ft³ each)82 bags

Take to the store — pick one

  • Ready-mix deliveryOrder by the yard1.36 yd³
  • Concrete mix, 80 lb bagsLighter on trips, heavier per bag× 62 bags
  • Concrete mix, 60 lb bagsEasier to lift× 82 bags

Updates as you type — no button to press.

The formulas

Slab volume = length × width × thickness
Footing volume = length × width × depth
Post hole volume = π × (diameter ÷ 2)² × depth × number of holes
Cubic yards = cubic feet ÷ 27
Bags = volume ÷ yield (80 lb bag = 0.6 ft³ · 60 lb bag = 0.45 ft³)

Bag yields are the standard figures printed on pre-mix bags. Above roughly 2 cubic yards — or about 100 bags — a ready-mix truck is usually cheaper and far less work than mixing by hand.

Worked example

A 10 × 10 ft patio slab, 4 in thick, with a 10% margin:

Volume = 10 × 10 × (4 ÷ 12) = 33.3 ft³ = 1.23 yd³. With the margin: 1.36 yd³ to order. Mixing it yourself: 36.7 ft³ ÷ 0.6 = 62 × 80 lb bags (or 82 × 60 lb bags) — a good argument for the truck.

Related calculators

Estimate only: concrete results are planning estimates for ordering material. Slab thickness, footing size, and frost depth are set by your local building code and soil conditions — this calculator is not structural or building-code advice. Check with your building department before you pour.

Drywall Calculator

Room size and sheet size become a sheet count — plus the screws, joint compound, and tape that finishing actually takes.

Units
ft
ft
ft
Drywall the ceiling too?Same sheet size assumed
10%

Covers cuts around doors, windows, and outlets, plus one spare sheet for a bad cut.

Your shopping list

17
drywall sheets to buy
472 sq ft to cover, 10% waste included.
Wall area352 sq ft
Ceiling area120 sq ft
Total area to cover472 sq ft
Screws needed (est.)544

Take to the store

  • Drywall sheets4 × 8 ft sheets× 17 sheets
  • Drywall screws1 lb boxes, ≈200 screws each× 3 boxes
  • Joint compound4.5 gal buckets, pre-mixed× 2 buckets
  • Joint tape250 ft rolls× 2 rolls

Updates as you type — no button to press.

The formulas

Wall area = 2 × (length + width) × wall height
Sheets = total area × (1 + waste %) ÷ sheet area, rounded up
Screws ≈ 32 per sheet · Compound ≈ 1 bucket (4.5 gal) per 400 sq ft

Screw count assumes field screws about 12 in apart on walls. Compound coverage is for taping plus two finish coats — textured or heavily repaired walls use more.

Worked example

A 12 × 10 ft room with 8 ft walls and the ceiling included, 4 × 8 ft sheets, 10% waste:

Walls = 2 × (12 + 10) × 8 = 352 sq ft, plus the 120 sq ft ceiling = 472 sq ft. 472 × 1.10 ÷ 32 = 16.2 → buy 17 sheets. Screws: 17 × 32 = 544 → 3 × 1 lb boxes. Compound and tape: 472 ÷ 400 → 2 buckets and 2 rolls.

Estimate only: drywall results are planning estimates for buying material. Sheet layout, fire ratings, and moisture-resistant board requirements are set by your local code — this is not structural or building-code advice.

Wallpaper Calculator

Room size, roll size, and pattern repeat become a roll count — with each strip lengthened to the next full repeat so the pattern matches at the seams.

Units
ft
ft
ft

Roll size: the standard US double roll — 20.5 in wide × 33 ft long — is already filled in below. Single and European rolls differ; your roll's size is printed on its label.

in
in
ft
10%

Covers trimming, pattern-matching mistakes, and a spare strip for future repairs. Keep the same dye lot for every roll.

Your shopping list

7
rolls of wallpaper to buy
21 strips at 9.33 ft each, pattern repeat included.
Wall run (minus openings)35 ft
Strips to hang21
Each strip (with repeat match)9.33 ft
Wall area352 sq ft

Take to the store

  • WallpaperDouble rolls, same dye lot× 7 rolls
  • Wallpaper paste1 gal tubs, ≈4 rolls per tub× 2 tubs

Updates as you type — no button to press.

The formulas

Strips = (perimeter − openings) ÷ roll width, rounded up
Strip length = wall height rounded up to a whole pattern repeat + 4 in trim
Rolls = strips × strip length ÷ roll length × (1 + waste %), rounded up

Openings are figured at 3 ft wide each. Paste is estimated at one gallon per four double rolls — check the paste tub, because coverage varies by paper weight.

Worked example

A 12 × 10 ft room, 8 ft walls, 1 door and 2 windows, 20.5 in × 33 ft rolls, 18 in pattern repeat, 10% waste:

Perimeter 44 ft − 9 ft of openings = 35 ft → 35 ÷ 1.71 ft = 21 strips. Each strip: 8 ft rounded up to a whole 18 in repeat = 9 ft, + 4 in trim = 9.33 ft. 21 × 9.33 = 196 ft ÷ 33 ft per roll = 5.94, × 1.10 = 6.53 → buy 7 rolls, plus 2 tubs of paste.

Related calculators

Estimate only: wallpaper results are planning estimates. Roll coverage and usable length vary by brand and pattern — confirm against the roll label, and buy every roll from the same dye lot.

Carpet Calculator

Broadloom carpet is sold off a roll, so this works out the linear feet and square yards in the roll direction that wastes less — or counts carpet tiles by the box. Padding included either way.

Units
Type
ft
ft

Padding: one roll covers about 270 sq ft — the standard 6 × 45 ft roll, already filled in.

Use a different roll size
sq ft
10%

Broadloom waste is mostly seams and roll-width offcuts — the calculator already picks the roll direction with less waste, then adds this margin.

Your shopping list

21
square yards of carpet to buy
14 linear ft off a 12 ft roll, waste included.
Linear feet off the roll14 ft
Room area168 sq ft
Carpet area (with waste)185 sq ft
Padding rolls1

Take to the store

  • CarpetBroadloom, 12 ft roll× 21 sq yd
  • Carpet paddingRolls covering 270 sq ft each× 1 roll

Updates as you type — no button to press.

The formulas

Broadloom: runs = room width ÷ roll width (tried both directions, shorter total wins)
Square yards = linear feet × roll width ÷ 9
Tiles = room area ÷ tile area × (1 + waste %) · Padding rolls = area ÷ roll coverage

Carpet is priced and sold by the square yard in most US stores, but cut from the roll by the linear foot — both figures are on your list so the store can cut it either way.

Worked example

A 12 × 14 ft room on a 12 ft roll, 10% waste:

Running the roll along the 12 ft wall takes 1 run of 14 ft; the other direction takes 2 runs of 12 ft (24 ft). The calculator picks 14 linear ft = 168 sq ft. With waste: 15.4 ft → 21 sq yd to order. Padding: 168 ÷ 270 → 1 roll.

Estimate only: carpet results are planning estimates. Seam placement, pattern matching, and stairs change the cut — have the store confirm the cut plan before the roll is cut. This is not structural or building-code advice.

Mulch Calculator

Bed size and depth become a volume — in cubic yards for a bulk delivery, or the 2 and 3 cu ft bag counts if you're hauling bags yourself.

Units
ft
ft
in
10%

Beds are never perfectly flat and mulch settles — a small overage beats a thin bare patch at the far end.

Your shopping list

0.49
cubic yards of mulch
12 ft³ exact, 10% margin included. Bagging it instead? See below.
Bed area48 sq ft
Volume (exact)12 ft³
Volume (with margin)13.2 ft³
2 cu ft bags instead7 bags

Take to the store

  • Bulk mulch deliveryOrder by the yard0.49 yd³
  • Mulch bags, 2 cu ftIf you're bagging it× 7 bags
  • Mulch bags, 3 cu ftLarger bags, fewer trips× 5 bags

Updates as you type — no button to press.

The formula

Volume = length × width × depth
Cubic yards = cubic feet ÷ 27
Bags = volume with margin ÷ bag size (2 or 3 cu ft), rounded up

Depth guide: 2 in refreshes existing mulch, 3 in is the standard for weed suppression, 4 in for new beds over bare soil. Keep mulch a few inches away from trunks and siding.

Worked example

A 12 × 4 ft bed (48 sq ft) at 3 in deep, 10% margin:

Volume = 48 × 0.25 ft = 12 ft³ = 0.44 yd³; with margin 0.49 yd³. In bags: 13.2 ÷ 2 = 7 × 2 cu ft bags, or 13.2 ÷ 3 = 5 × 3 cu ft bags.

Estimate only: mulch results are planning estimates based on a level bed at an even depth. Actual coverage varies with settling and bed shape.

Bulk Material / Cubic Yard Calculator

Gravel, sand, topsoil, or crushed stone: area and depth become the cubic yards and tons a landscape supplier will ask for.

Units
ft
ft
in
10%

Ground settles and spreads past the edges — ordering a little extra is far cheaper than a second delivery fee.

Your shopping list

0.68
cubic yards to order
16.7 ft³ exact, 10% margin included — about 0.95 tons.
Volume (exact)16.7 ft³
Volume (with margin)18.3 ft³
Weight0.95 tons
1 cu ft bags instead19 bags

Take to the store

  • Bulk deliveryBy the cubic yard0.68 yd³
  • Weight on the truckFor delivery limits0.95 tons
  • Bagged material, 1 cu ftSmall jobs only× 19 bags

Updates as you type — no button to press.

The formulas

Volume = length × width × depth
Cubic yards = cubic feet ÷ 27
Tons = cubic yards × material density (gravel 1.40, sand 1.35, topsoil 1.15, crushed stone 1.45 tons per yd³)

Densities are planning averages — wet sand and topsoil weigh noticeably more. Most suppliers sell by the yard or by the ton; your list has both so you can order either way.

Worked example

A 10 × 10 ft area, 2 in of gravel, 10% margin:

Volume = 100 × (2 ÷ 12) = 16.7 ft³ = 0.62 yd³; with margin 0.68 yd³. Weight: 0.68 × 1.40 = 0.95 tons — a single small delivery.

Related calculators

Estimate only: bulk material results are planning estimates. Density and moisture change the weight per yard — confirm the supplier's conversion before ordering by the ton.

Paver Calculator

Patio or walkway area, paver size, and joint spacing become a paver count — plus the crushed gravel base and bedding sand that go underneath.

Units
ft
ft
in
in
in
in
in
10%

Covers edge cuts and a few spares — paver dye lots differ, so buy spares now, not later.

Your shopping list

473
pavers to buy
100 sq ft at 0.23 sq ft per paver with joint, 10% waste included.
Area100 sq ft
Each paver covers (incl. joint)0.23 sq ft
Gravel base1.23 yd³ · ≈1.73 tons
Bedding sand8.3 ft³

Take to the store

  • Pavers4 × 8 in, waste included× 473 pavers
  • Crushed gravel baseBy the ton≈ 1.73 tons
  • Bedding sand, 50 lb bags≈0.5 cu ft per bag× 17 bags

Updates as you type — no button to press.

The formulas

Paver footprint = (length + joint) × (width + joint)
Pavers = area ÷ footprint × (1 + waste %), rounded up
Base volumes = area × depth · Gravel ≈ 1.40 tons per yd³ · Sand bags ≈ 0.5 cu ft each

Base depths shown are the usual planning figures: 4 in of compacted gravel and 1 in of bedding sand for patios and walks. Driveways need a deeper base — check a driveway spec before ordering.

Worked example

A 10 × 10 ft patio (100 sq ft), 4 × 8 in pavers, ⅛ in joints, 10% waste:

Each paver with its joint covers 4.125 × 8.125 in = 0.23 sq ft. 100 ÷ 0.23 × 1.10 = 473 pavers. Gravel base at 4 in: 33.3 ft³ = 1.23 yd³ ≈ 1.73 tons. Bedding sand at 1 in: 8.3 ft³ → 17 × 50 lb bags.

Estimate only: paver results are planning estimates for patios and walkways. Base depth, compaction, and edge restraints depend on soil and use — driveways and load-bearing areas need a proper spec, not this estimate.

Fence Calculator

Fence length and post spacing become sections — and sections become posts, pickets, rails, and a concrete bag for every hole.

Units
ft
ft
in
in

Concrete: 2 × 60 lb bags per post — the standard for a typical post hole, already filled in.

Use a different amount per post
10%

Applies to pickets — warped boards and bad cuts are normal. Posts and rails are counted exactly by section.

Your shopping list

8
posts to buy
7 sections at up to 8 ft spacing, plus pickets, rails, and concrete below.
Sections7
Posts (sections + 1)8
Pickets (with waste)110
Rails14

Take to the store

  • Fence posts4 × 4, one per section end× 8 posts
  • Pickets5.5 in wide, waste included× 110 pickets
  • Rails2 × 4, one per section span× 14 rails
  • Concrete mix, 60 lb bags2 bags per post× 16 bags

Updates as you type — no button to press.

The formulas

Sections = fence length ÷ post spacing, rounded up
Posts = sections + 1 · Rails = sections × rails per section
Pickets = length ÷ (picket width + gap) × (1 + waste %)
Concrete bags = posts × bags per post

Rail length is figured at the full section span — buy rail stock at least as long as your widest section. Gates need extra posts and hardware that this estimate doesn't include.

Worked example

A 50 ft fence, posts every 8 ft, 5.5 in pickets with a ½ in gap, 2 rails per section, 10% picket waste:

Sections = 50 ÷ 8 = 6.25 → 7 sections, so 8 posts. Pickets: 600 in ÷ 6 in = 100, × 1.10 = 110 pickets. Rails: 7 × 2 = 14. Concrete: 8 posts × 2 bags = 16 bags.

Related calculators

Estimate only: fence results are planning estimates. Post depth, frost line, setbacks, and HOA or permit rules are local — check before you dig, and always have underground utilities marked first.

Deck Calculator

Deck size, board width, and joist spacing become the board count — plus joists and the two-screws-per-crossing fastener count most people under-buy.

Units
ft
ft
in
in
in
ft
10%

Covers end cuts and the occasional warped board. Composite boards especially — buy spares from the same run.

Your shopping list

39
deck boards to buy
26 rows × 16 ft = 416 linear ft, cut from 12 ft stock, waste included.
Board rows across the width26
Total board length416 ft
Joists13
Deck screws (est.)676

Take to the store

  • Deck boards12 ft stock, waste included× 39 boards
  • Joist boardsOne per joist, deck-width long× 13 boards
  • Deck screws5 lb boxes, ≈300 screws each× 3 boxes

Updates as you type — no button to press.

The formulas

Rows = deck width ÷ (board width + gap), rounded up
Boards = rows × deck length ÷ stock length × (1 + waste %)
Joists = deck length ÷ joist spacing + 1
Screws = rows × joists × 2 per crossing

Boards are figured running the full deck length. Picture-frame borders, diagonal layouts, and stairs use more — raise the waste margin for those. Joist boards are listed at deck-width length each.

Worked example

A 16 × 12 ft deck, 5.5 in boards with a ¼ in gap, joists 16 in on center, 12 ft stock, 10% waste:

Rows = 144 in ÷ 5.75 in = 26 rows → 26 × 16 = 416 linear ft ÷ 12 ft = 34.7, × 1.10 → 39 boards. Joists: 192 ÷ 16 + 1 = 13. Screws: 26 × 13 × 2 = 676 → 3 × 5 lb boxes.

Related calculators

Estimate only: deck results are planning estimates for the decking surface and joist count only. Footings, beams, ledger attachment, railing, and spans are structural and code-set — this is not structural or building-code advice.

Roofing Calculator

Building footprint, roof pitch, and overhang become the true sloped roof area — then squares, shingle bundles, and underlayment rolls.

Units
ft
ft
in
10%

Covers starter courses, ridge cuts, valleys, and damaged shingles. Steep or cut-up roofs need more.

Your shopping list

50
shingle bundles to buy
15.03 squares at 3 bundles per square, 10% waste included.
Footprint incl. overhang1,344 sq ft
Slope factor× 1.118
True roof area1,503 sq ft
Roofing squares15.03

Take to the store

  • Shingle bundles3 bundles per square× 50 bundles
  • Underlayment rolls≈400 sq ft per roll× 4 rolls
  • Ridge cap bundles≈35 ft of ridge per bundle× 2 bundles

Updates as you type — no button to press.

The formulas

Plan area = (length + 2 × overhang) × (width + 2 × overhang)
Slope factor = √(1 + (pitch ÷ 12)²)
Roof area = plan area × slope factor · Squares = roof area ÷ 100
Bundles = squares × 3 × (1 + waste %)

This uses the standard footprint-times-slope-factor estimate, which suits simple gable and hip roofs. Valleys, dormers, and multiple roof planes add area — measure those planes separately and add them in.

Worked example

A 40 × 30 ft building, 6/12 pitch, 12 in overhangs, 10% waste:

Plan area = 42 × 32 = 1,344 sq ft. Slope factor for 6/12 = 1.118 → roof area 1,503 sq ft = 15.03 squares. Bundles: 15.03 × 3 × 1.10 = 50 bundles. Underlayment: 1,503 ÷ 400 → 4 rolls; ridge cap for the 42 ft ridge → 2 bundles.

Estimate only: roofing results are planning estimates for material quantities only. Roofing involves fall hazards and local code requirements for underlayment, ventilation, and flashing — this is not structural or building-code advice.

Stair Calculator

Total rise, your target riser height, and tread depth become the riser and tread counts, the total run, and the stringer length — with the usual comfortable ranges flagged as guidance only.

Units
ft
in
in
in

No waste slider here — stairs are counted exactly: one riser per step up, one tread per riser except the top landing. The guidance rows on the right flag the usual comfortable ranges; your local code is the final word.

Your shopping list

14
risers
Actual riser height 7.71 in — treads, run, and stringers below.
Actual riser height7.71 in
Treads / total run13 treads · 10.83 ft run
Stringer length (min.)14.08 ft
Comfort check (2R + T)25.4 in — in the 24–26 in range

Take to the store

  • Stringer boards2 × 12, 16 ft stock× 2 boards
  • Tread boardsOne per tread× 13 boards
  • Riser boardsOne per riser (if closed risers)× 14 boards

Updates as you type — no button to press.

The formulas

Risers = total rise ÷ desired riser height, rounded to a whole number
Actual riser = total rise ÷ risers (every riser must be equal)
Treads = risers − 1 · Total run = treads × tread depth
Stringer length = √(total rise² + total run²)

Guidance only: risers are usually most comfortable around 7–7¾ in and treads at least 10 in deep, and the carpenter's rule 2 × riser + tread ≈ 24–26 in should hold. These are comfort conventions, not code — stair geometry is code-regulated, so verify against your local code before building.

Worked example

A 9 ft floor-to-floor rise (108 in), aiming for 7.5 in risers and 10 in treads:

108 ÷ 7.5 = 14.4 → 14 risers at an actual 7.71 in each. Treads = 13, total run = 13 × 10 = 130 in (10.83 ft). Stringer: √(108² + 130²) = 169 in = 14.08 ft → buy 16 ft 2 × 12 stock, 2 stringers for a 36 in stair. Comfort check: 2 × 7.71 + 10 = 25.4 in — in range.

Related calculators

Estimate only: stair results are planning estimates and comfort guidance only. Stair riser, tread, headroom, and handrail dimensions are set by building code and inspected — verify every dimension against your local code before cutting a stringer.

Stud & Framing Calculator

Wall length, on-center spacing, and openings become a stud count — including king and jack studs for openings — plus the plate boards that tie the wall together.

Units
ft
ft
ft
10%

Framing lumber includes culls — some studs arrive bowed or split. The margin makes sure the wall doesn't stop one stud short.

Your shopping list

25
studs to buy
16 layout studs + 6 for openings and ends, 10% waste included.
Layout studs16
Openings + end studs6
Plate material60 linear ft
Stud length8 ft

Take to the store

  • Studs2 × 4, wall-height long× 25 studs
  • Plate boards2 × 4 stock for top + bottom plates× 8 boards

Updates as you type — no button to press.

The formulas

Layout studs = wall length ÷ spacing + 1
Extras = 4 per opening (king + jack pair) + 2 end studs
Studs = (layout + extras) × (1 + waste %)
Plates = wall length × 3 (bottom + double top) ÷ stock length

This is a material estimate for a single non-load-bearing-style wall layout. Headers over openings, corners, and intersecting walls add lumber that depends on the design — a framer's layout is the final word.

Worked example

A 20 ft wall, 8 ft tall, studs 16 in on center, 1 opening, 10% waste:

Layout studs: 240 in ÷ 16 + 1 = 16. Extras: 4 for the opening + 2 ends = 6 → 22 × 1.10 = 25 studs. Plates: 20 × 3 = 60 linear ft ÷ 8 ft stock = 8 boards.

Related calculators

Estimate only: stud counts are planning estimates for buying lumber. Whether a wall is load-bearing, and header, bracing, and fire-blocking requirements, are set by code and design — this is not structural or building-code advice.

Board Foot Calculator

Hardwood is sold by the board foot, not by the board. Thickness, width, length, and piece count become board feet — and a cost estimate if you add the price.

Units
in
in
ft
10%

Milling rough lumber to final size easily eats 10–25% — raise this if you're starting from rough-sawn stock.

Your shopping list

44
board feet to buy
40 board feet in the finished pieces, 10% milling waste included.
Board feet per piece4 bf
Total in pieces40 bf
Estimated cost$198.00
Pieces10

Take to the store

  • Lumber1 × 6 in × 8 ft pieces44 bf total
  • Estimated costAt $4.50 per board foot$198.00

Updates as you type — no button to press.

The formula

Board feet per piece = thickness (in) × width (in) × length (ft) ÷ 12
Total = board feet per piece × number of pieces
Cost = board feet with waste × price per board foot

Lumberyards usually price from nominal or rough dimensions and round up to the next whole board foot per board — expect the register total to land a little above the exact math.

Worked example

Ten pieces of 1 × 6 in × 8 ft hardwood at $4.50 per board foot, 10% milling waste:

Per piece: 1 × 6 × 8 ÷ 12 = 4 board feet. Ten pieces = 40 bf, × 1.10 = 44 board feet to buy → 44 × $4.50 = $198.00 estimated.

Related calculators

Estimate only: board foot results are planning estimates. Species, grade, and yard rounding rules change the final price — confirm the yard's measuring rules before a large order.

Baseboard & Trim Calculator

Room perimeter, minus the doors and openings trim doesn't cross, divided into stock lengths — the piece count to buy.

Units
ft
ft
ft
ft
ft
10%

Miter cuts eat length at every corner — 10% is the minimum sensible margin, 15% for rooms with many corners.

Your shopping list

6
pieces of trim to buy
41 ft of wall to cover after openings, 10% waste included.
Room perimeter44 ft
Minus openings−3 ft
Net length to cover41 ft
Buy length (with waste)45.1 ft

Take to the store

  • Baseboard / trim8 ft stock pieces× 6 pieces

Updates as you type — no button to press.

The formulas

Perimeter = 2 × (length + width)
Net length = perimeter − (openings × width each) − other gaps
Pieces = net length × (1 + waste %) ÷ stock length, rounded up

Long uninterrupted walls are best done in the longest stock you can transport — fewer pieces means fewer scarf joints. Measure any wall longer than your stock length twice before cutting.

Worked example

A 12 × 10 ft room, one 3 ft doorway, 8 ft stock, 10% waste:

Perimeter = 2 × (12 + 10) = 44 ft. Minus the doorway: 41 ft to cover. With waste 45.1 ft ÷ 8 ft = 6 pieces.

Related calculators

Estimate only: trim results are planning estimates. Profile matching on older homes can be the hard part — bring a cut-off of the existing profile to the store when you're matching, not just the count.

Grout & Backsplash Calculator

Backsplash area, tile size, and joint width become tile boxes and grout bags — sized for small wall tiles, where the grout math is nothing like a floor.

Units
ft
ft
in
in
in

Estimate — box counts vary by brand. The exact count is printed on the side of the tile box; pick yours above if it differs.

15%

Small tiles mean lots of cuts around outlets and corners — 15% is the standard backsplash margin.

Your shopping list

4
boxes of tile to buy
130 tiles total, 15% waste included — plus grout and mastic below.
Backsplash area15 sq ft
Each tile covers (incl. joint)0.13 sq ft
Tiles needed130
Grout needed≈ 2.8 lb

Take to the store

  • TileBoxes of 40 tiles× 4 boxes
  • Grout, unsanded10 lb bags× 1 bag
  • Tile mastic1 gal tubs, ≈30 sq ft each× 1 tub

Updates as you type — no button to press.

The formulas

Tile + joint footprint = (tile length + joint) × (tile width + joint)
Tiles = area ÷ footprint × (1 + waste %)
Grout ≈ total joint length × joint width × ⅜ in deep, by volume

Backsplashes normally use unsanded grout for joints under ⅛ in and sanded above that — check the tile maker's guidance, since polished stone can scratch with sanded grout. Mastic is for dry walls only; use thinset near sinks and stoves.

Worked example

A 10 ft × 1.5 ft backsplash (15 sq ft), 3 × 6 in subway tile, ⅛ in joints, 15% waste, 40 tiles per box:

Each tile with its joint covers 3.125 × 6.125 in = 0.13 sq ft. 15 ÷ 0.13 × 1.15 = 130 tiles → 4 boxes. Grout by joint volume ≈ 2.8 lb → 1 × 10 lb bag. Mastic: 15 ÷ 30 → 1 tub.

Related calculators

Estimate only: grout and tile results are planning estimates — bag coverage varies by brand, joint depth, and tile thickness, so check the bag and round up when between bags.

Insulation Calculator

Attic or wall area becomes batt packages by their printed coverage — or blown-in bags for the R-value you're targeting.

Units
Type
sq ft

Package coverage: 100 sq ft per package is a common estimate and is already filled in. Coverage varies a lot with R-value and brand — the exact figure is printed on the package wrap, so check it before buying.

Use the coverage printed on your package
sq ft
10%

Covers cutting around joists, wiring, and eaves. Blown-in settles over time — the margin keeps the settled depth at target.

Your shopping list

11
batt packages to buy
1,000 sq ft at 100 sq ft per package, 10% waste included.
Area1,000 sq ft
Coverage per package100 sq ft
Packages (exact)10

Take to the store

  • Batts / rollsPackages covering 100 sq ft each× 11 packages

Updates as you type — no button to press.

The formulas

Batts: packages = area ÷ coverage per package × (1 + waste %)
Blown-in: bags = area ÷ 1,000 × bags-per-1,000 for the target R (R-19 ≈ 20 · R-30 ≈ 32 · R-38 ≈ 41 · R-49 ≈ 55)

Blown-in bag counts are planning averages for common bag weights — every brand prints its own coverage chart on the bag, and that chart wins. Recommended attic R-values vary widely by climate zone; check the recommendation for yours.

Worked example

A 1,000 sq ft attic with batt packages covering 100 sq ft each, 10% waste:

1,000 ÷ 100 = 10 packages exactly, × 1.10 = 11 packages. Switch to blown-in at R-30 and the same attic takes 32 × 1.10 → 36 bags.

Related calculators

Estimate only: insulation results are planning estimates. Required R-values, vapor barriers, and ventilation are set by your local code and climate zone — this is not building-code advice.

Loan Payoff Calculator

See when a loan is paid off, what it costs in interest — and what an extra payment each month saves you. General math only, not financial advice.

Payment from
% / yr
years

Assumption, shown openly: interest is figured monthly at 1/12 of the yearly rate, and payments are made monthly. Taxes, fees, and insurance are not included.

Your payoff

47
months to pay off, extra payment included
Paid off 13 months early.
Monthly payment$386.66
Payoff date (with extra)—
Payoff date (no extra)—
Time saved13 months
Interest with extra$2,444
Interest without extra$3,199
Interest saved$755
Paying an extra $100 a month pays this loan off 13 months early and saves about $755 in interest.

Updates as you type — no button to press.

How it works

Monthly rate = yearly rate ÷ 12
Payment (from term) = amount × rate × (1 + rate)months ÷ ((1 + rate)months − 1)
Each month: interest = balance × monthly rate; the rest of the payment lowers the balance

The calculator walks the loan month by month, just like a lender's schedule. Adding an extra payment sends more of each payment to the balance, so the balance falls faster and less interest builds up.

Worked example

A $20,000 loan at 6% per year over 5 years, with an extra $100 a month:

The payment from the term is $386.66 a month. With no extra, the loan takes 60 months and costs $3,199 in interest. Adding $100 a month pays it off in 47 months with $2,444 in interest — 13 months sooner and $755 saved.

Related calculators

Not financial advice: this is an estimate from general loan math. Your lender's actual schedule, fees, and payoff amount can differ. For decisions about your own loans, check your loan documents or a qualified financial professional.

Savings Goal Calculator

How long until you reach a savings goal — and, if you have a deadline, how much you'd need to put away each month to get there. General math only, not financial advice.

% / yr
months

Assumption, shown openly: interest is figured monthly at 1/12 of the yearly rate, and each month's deposit is added at the end of the month. Real account rates change over time, so treat the result as an estimate.

Your goal

42
months to reach your goal
At $200 a month plus interest.
Time to goal42 months (3 yrs 6 mos)
Reach the goal around—
Still to save$9,000
Needed per month for your target$232
Saving $200 a month reaches $10,000 in 42 months. To get there in 36 months instead, you'd need about $232 a month.

Updates as you type — no button to press.

How it works

Each month: balance grows by the monthly rate (yearly rate ÷ 12), then the month's deposit is added
Time to goal = the first month the balance reaches the goal
Needed per month = (goal − grown savings) spread evenly over the target months, interest included

The calculator walks the balance month by month, so the interest your savings earn along the way counts toward the goal too.

Worked example

A $10,000 goal, $1,000 already saved, $200 added each month, 4% yearly interest, and a 36-month target:

At $200 a month the balance reaches the goal in 42 months. To reach it in 36 months, you'd need about $232 a month instead.

Related calculators

Not financial advice: this is an estimate from general savings math, using the rate you enter. Actual rates and returns vary and aren't guaranteed. For decisions about your own savings, check with your bank or a qualified financial professional.

Hourly-to-Salary Converter

Convert pay both ways: an hourly wage into weekly, monthly, and yearly pay — or a yearly salary back into an hourly rate. Pay is before taxes and deductions.

Hourly → salary

Start from a wage.

hrs
wks

Both directions use the same hours-per-week and weeks-per-year shown above — nothing is hidden. Monthly pay is the yearly pay divided by 12.

Your pay

$52,000
per year at $25 an hour
40 hours a week, 52 weeks a year.
From the hourly wage — weekly$1,000
From the hourly wage — monthly$4,333
From the hourly wage — yearly$52,000
From the salary — hourly$25.00
From the salary — weekly$1,000
From the salary — monthly$4,333
At $25 an hour, 40 hours a week, 52 weeks a year, pay is $1,000 a week, about $4,333 a month, and $52,000 a year — before taxes.

Updates as you type — no button to press.

How it works

Weekly pay = hourly wage × hours per week
Yearly pay = weekly pay × weeks per year
Monthly pay = yearly pay ÷ 12
Hourly rate (reverse) = yearly salary ÷ weeks per year ÷ hours per week

The standard full-time assumption — 40 hours a week, 52 weeks a year — is pre-filled and labeled, and you can change both numbers. Part-time schedules and unpaid time off change the result, which is exactly why the assumptions sit in the open.

Worked example

$25 an hour, 40 hours a week, 52 weeks a year:

Weekly = 25 × 40 = $1,000. Yearly = 1,000 × 52 = $52,000. Monthly = 52,000 ÷ 12 = about $4,333. In reverse, a $52,000 salary ÷ 52 ÷ 40 = $25.00 an hour.

Related calculators

Estimate only: pay figures are gross pay — before taxes, benefits, and other deductions — using the hours and weeks you enter. This is general math, not financial or tax advice.

Weighted Grade Calculator

Enter each grading category, its weight, and the average score in it. The calculator checks that your weights add to 100% and works out the weighted grade.

Letter grades use the common standard scale, labeled as such: A = 90–100, B = 80–89, C = 70–79, D = 60–69, F = below 60. Your school or teacher may use a different scale — if so, the percentage is the number to trust.

Your grade

85%
weighted grade — a B
Weights add to 100%.
Tests count the most here: 85% on tests at a 40% weight contributes 34 points of the 85% total.

Updates as you type — no button to press.

How it works

Each category contributes: score × (weight ÷ 100)
Weighted grade = all contributions added together
(If the weights don't add to 100, the grade is figured proportionally from the weights entered — and the page says so.)

A category with a bigger weight moves the final grade more. That's why a test score usually matters more than a single homework score.

Worked example

Tests 40% weight with an 85% average, Homework 30% at 92%, Quizzes 30% at 78%:

Tests: 85 × 0.40 = 34. Homework: 92 × 0.30 = 27.6. Quizzes: 78 × 0.30 = 23.4. Total = 85% — a B on the common standard scale.

Please note: letter grades use the common standard scale shown on this page. Individual teachers and schools set their own scales and rounding rules, which can change a letter grade at the edges.

Group Maker

Paste or type a class list — one name per line — choose how to split it, and get shuffled groups you can print, copy, or save.

12 names. Blank lines are ignored.

Split by

Groups are shuffled at random every time you press the button. If the class doesn't divide evenly, the leftover students are spread one each into the first groups, so group sizes differ by at most one.

Your groups

4
groups of 3
12 students, shuffled.

Copy or save the lists from the printable view. Press Shuffle for a new mix.

How it works

Names are shuffled into a random order, then dealt into groups one at a time
By group size: number of groups = class size ÷ group size, rounded up
By number of groups: students are dealt evenly, sizes differ by at most one

Dealing names one at a time — like dealing cards — is what keeps the groups even when the numbers don't divide cleanly.

Worked example

The 12 names in the list, split by a group size of 3:

12 ÷ 3 = 4 groups of 3 students. The names inside each group change every shuffle — the counts don't. With 13 names instead, you'd get 5 groups sized 3, 3, 3, 2, 2 — sizes never differ by more than one.

Please note: groups are random. If a particular mix doesn't work for your class — friends who shouldn't be together, students who need separating — just press Shuffle again for a new one.

Rubric Points Converter

Convert between points, percentage, and letter grade. Change any one of them — points earned or percentage — and the others follow.

%

The letter grade uses the common standard scale, labeled as such: A = 90–100, B = 80–89, C = 70–79, D = 60–69, F = below 60. Your school may use a different scale — if so, trust the percentage.

Converted

90%
letter grade A
45 out of 50 points.
A90–100%
B80–89%
C70–79%
D60–69%
Fbelow 60%

The common standard scale — the one most U.S. classrooms use. Shown in full so nothing about the conversion is hidden.

45 out of 50 points is 90% — an A on the common standard scale.

Updates as you type — no button to press.

How it works

Percentage = points earned ÷ points possible × 100
Points earned = percentage ÷ 100 × points possible
Letter grade comes from the percentage on the common standard scale above

On a rubric, each criterion's points add up to the total possible. This converter works on those totals — add up the rubric first, then convert here.

Worked example

45 points earned out of 50 possible:

45 ÷ 50 × 100 = 90% — an A on the common standard scale. In the other direction, 90% of 50 points = 45 points.

Related calculators

Please note: letter grades use the common standard scale shown on this page. Individual teachers and schools set their own scales and rounding rules, which can change a letter grade at the edges.

Recipe Scaler

Type the recipe's ingredients once, say how many servings it makes and how many you need — every amount is scaled and rounded to the fractions a cook can actually measure.

Ingredients

Amount, unit, and name for each line of the recipe.

Scaled amounts are rounded to the nearest cook-friendly fraction (⅛, ¼, ⅓, ½, ⅔, ¾). For ingredients measured by weight — grams, ounces — the exact scaled number is what matters; type it as a decimal and the fraction rounding still lands within an eighth.

Your scaled recipe

2×
scaling factor
4 servings → 8 servings.

Scaled ingredients

    Updates as you type — no button to press.

    How it works

    Scaling factor = servings you want ÷ servings the recipe makes
    Scaled amount = original amount × scaling factor, rounded to the nearest ⅛

    Two honest exceptions: leavening and seasoning don't scale perfectly in real kitchens — a doubled cake rarely needs exactly double the baking powder, and spices are best adjusted to taste. The list gives you the straight math; adjust those two by feel.

    Worked example

    The recipe above makes 4 servings; you want 8, so the factor is 8 ÷ 4 = 2×:

    Flour 2 cups → 4 cups. Sugar ¾ cup → 1½ cups. Eggs 2 → 4. Butter ½ cup → 1 cup. Halving works the same way: 4 servings down to 2 is a 0.5× factor.

    Questions

    Does baking time change when I scale?
    Time depends on the size and depth of what goes in the oven, not the batch total. The same pan at the same depth takes about the same time; a doubled recipe in a deeper pan needs longer.

    Can I scale by weight instead?
    Yes — enter grams or ounces as the amounts, with the unit typed as g or oz. Weight scales exactly, which is why bakers prefer it.

    Please note: scaled recipes are straight arithmetic. Cooking times, pan sizes, leavening, and seasoning may need adjusting when a recipe changes size — taste and check as you go.

    Roast Cooking Time

    Pick the meat, enter its weight, and say when you want to serve — get the oven temperature, the cooking time, and the time the roast has to go in.

    The guidance used, stated plainly: standard USDA-style roasting guidance — turkey at 325 °F by the weight table below, whole chicken at 350 °F for 20 min/lb + 15 min, beef roast at 325 °F for 20 min/lb (medium), pork roast at 325 °F for 25 min/lb. Stuffed turkey adds 30 minutes; stuffed chicken adds 15.

    Always confirm with a thermometer: poultry is done at 165 °F; beef and pork roasts at 145 °F plus a 3-minute rest. The clock plans the meal — the thermometer decides doneness. Food-safety guidance also recommends cooking stuffing in a separate dish rather than inside the bird.

    Your roasting plan

    3 hrs 23 min
    of cooking — plan on this
    USDA-style range for this weight: 3 hrs – 3 hrs 45 min.
    Oven temperature325 °F
    Cooking time3 hrs – 3 hrs 45 min
    Resting time after roasting30 min
    Put it in the oven at2:07 PM
    Ready to serve6:00 PM
    A 12 lb unstuffed turkey at 325 °F takes about 3 hrs 23 min, plus 30 minutes resting. In the oven by 2:07 PM to serve at 6:00 PM — and check for 165 °F with a thermometer before carving.

    Updates as you type — no button to press.

    The guidance table

    Turkey, unstuffed, 325 °F: 8–12 lb → 2¾–3 hrs · 12–14 lb → 3–3¾ hrs · 14–18 lb → 3¾–4¼ hrs · 18–20 lb → 4¼–4½ hrs · 20–24 lb → 4½–5 hrs (stuffed: +30 min)
    Start time = serve time − cooking time − resting time

    The plan uses the middle of the range for your weight. Start checking the temperature at the early end of the range — ovens vary, and a roast that finishes early rests happily under foil, while a late one delays everything.

    Worked example

    A 12 lb unstuffed turkey, served at 6:00 PM:

    The table gives 3 to 3¾ hours at 325 °F; plan on the middle, about 3 hrs 23 min. Add 30 minutes of resting: 6:00 PM − 3 hrs 53 min = in the oven by 2:07 PM. Done means 165 °F in the thickest part of the thigh, whatever the clock says.

    Questions

    Why does the start time use the middle of the range?
    Ranges exist because ovens, pans, and starting temperatures vary. Planning on the middle — and checking doneness at the early end — is how the roast lands on time without overcooking.

    Does a frozen or partly thawed roast change this?
    Yes — these times assume a fully thawed roast at refrigerator temperature. A partly frozen roast can take half again as long; thaw fully first whenever you can.

    Food safety: times here are planning estimates from standard USDA-style guidance. Always confirm doneness with a meat thermometer — 165 °F for poultry, 145 °F plus a 3-minute rest for beef and pork roasts — and refrigerate leftovers within 2 hours.

    Baker's Percentage

    The language bread formulas are written in: flour is always 100%, and every other ingredient is a percentage of the flour weight. Enter your weights and get the formula as a list.

    g

    Other ingredients

    Name and weight in grams for everything else in the dough.

    Using a sourdough starter or preferment? Add it as an ingredient line with its full weight — and remember its flour and water are inside it, which is why many bakers also track the starter's own flour separately.

    Your formula

    840 g
    total dough weight
    Total formula: 168% of the flour weight.

    Updates as you type — no button to press.

    How it works

    Ingredient % = ingredient weight ÷ flour weight × 100
    Total dough weight = flour + every ingredient's weight

    Because the percentages are relative to flour, a formula written this way scales to any batch size: pick a new flour weight, multiply, and the dough is identical. Water percentage is the dough's hydration — most everyday breads sit between 60% and 80%.

    Worked example

    The formula above: 500 g flour, 325 g water, 10 g salt, 5 g yeast:

    Water = 325 ÷ 500 = 65% (the hydration). Salt = 2%. Yeast = 1%. Total dough = 500 + 325 + 10 + 5 = 840 g — one nice loaf, or two small ones.

    Questions

    Why do the percentages add to more than 100%?
    Because each one is measured against the flour alone, not against the whole dough. A total over 100% is normal — it simply tells you the dough weighs that much more than its flour.

    My recipe uses two flours. What do I enter?
    Add both flour weights together as the flour weight — percentages are always against total flour. You can still note the split (say, 80/20 bread flour to whole wheat) in your own notes.

    Please note: baker's percentages describe a formula; they don't guarantee a result. Flour, temperature, and fermentation all move the outcome — the percentages are how you record and repeat what worked.

    Calorie Needs (TDEE)

    An estimate of the calories you burn in a day, from the Mifflin-St Jeor formula — plus what standard lose, maintain, and gain targets look like against it. An estimate, not medical advice.

    yrs

    Height in inches: 5 ft 8 in is 68 in. The activity multipliers are the standard ones paired with this formula — pick the level that honestly matches a typical week, not your best week.

    Your estimate

    2,386
    calories a day to maintain your weight
    Estimate from the Mifflin-St Jeor formula — not medical advice.
    BMR (resting burn)1,540 cal/day
    Lose about 1 lb a week1,886 cal/day
    Lose about ½ lb a week2,136 cal/day
    Maintain2,386 cal/day
    Gain about ½ lb a week2,636 cal/day
    Gain about 1 lb a week2,886 cal/day
    At maintenance of about 2,386 calories a day, eating roughly 500 a day less (1,886) is the standard estimate for losing about a pound a week.

    Updates as you type — no button to press.

    The formula

    Mifflin-St Jeor BMR — men: 10 × weight (kg) + 6.25 × height (cm) − 5 × age + 5
    Women: 10 × weight (kg) + 6.25 × height (cm) − 5 × age − 161
    TDEE (maintenance) = BMR × activity multiplier
    Lose/gain rows = maintenance ∓ 250 or 500 cal/day (the standard estimate: ~3,500 cal ≈ 1 lb)

    Mifflin-St Jeor is the formula most dietitians start from because it tracks measured resting burn more closely than older formulas for most adults. It is still an estimate — individual burn varies.

    Worked example

    A 30-year-old woman, 170 lb (77.1 kg), 68 in (172.7 cm), moderately active:

    BMR = 771 + 1,080 − 150 − 161 = 1,540 cal/day. Maintenance = 1,540 × 1.55 = 2,386 cal/day. Losing about a pound a week ≈ 2,386 − 500 = 1,886 cal/day.

    Questions

    How accurate is this?
    For most people the formula lands within roughly 10% of measured burn — close enough to plan from, not exact. If your weight doesn't move as expected over 3–4 weeks at a target, the target — not you — needs adjusting.

    Is eating below these numbers safe?
    Common guidance is not to go below about 1,200 cal/day for women or 1,500 for men without medical supervision. This tool is an estimate, not medical advice — for anything beyond general planning, talk to a clinician or dietitian.

    Estimate only — not medical advice: calorie figures come from the Mifflin-St Jeor formula and standard activity multipliers. They don't account for medical conditions, medications, pregnancy, or individual variation. For personal nutrition or health decisions, see a qualified professional.

    Running Pace

    Distance and finish time in — pace per mile and per kilometer plus a split for every mile or kilometer out. Or work the other way: set a target pace and get the finish time. Estimates for planning a run, not medical advice.

    Start from

    Common race distances: 5K = 5 km (3.11 mi) · 10K = 10 km (6.21 mi) · half marathon = 21.1 km (13.11 mi) · marathon = 42.2 km (26.22 mi).

    Your pace

    5:30
    per kilometer
    For 10 km in 55:00. Estimate — not medical advice.
    Pace per mile8:51 /mi
    Pace per kilometer5:30 /km
    Speed10.9 km/h · 6.8 mph
    Total time55:00

    Splits — clock time at each mark

      Updates as you type — no button to press.

      How it works

      Pace = total time ÷ distance
      Finish time (from a target pace) = pace × distance
      Split at each whole mile/km = pace × that many miles/km
      1 mile = 1.609 km

      Splits assume an even pace from start to finish — the plan most runners aim for. Hills, weather, and a fast start all move real splits around; treat the list as the target, not a promise.

      Worked example

      A 10K finished in 55:00:

      Pace = 55:00 ÷ 10 = 5:30 per km, which is 8:51 per mile. The split list reads 5:30 at 1 km, 11:00 at 2 km, and so on to 55:00 at the finish. Working backward, a 5:30/km target pace over 10 km gives the same 55:00 finish.

      Questions

      Why is my watch's pace different?
      GPS watches measure the distance you actually ran — around corners, weaving, and GPS wobble included — which is usually a little longer than the measured course. Small differences are normal.

      Should every split be identical?
      Even splits are the simplest plan and work well for most races. Many runners aim for a slightly slower first mile instead — the math here gives you the even-pace baseline to adjust from.

      Estimate only — not medical advice: pace and split figures are arithmetic from the distance and time you enter. Train within your own fitness and health limits, and see a professional for personal training or medical guidance.

      Daily Water Intake

      A general daily water target from your weight and exercise time, using the widely used half-ounce-per-pound rule. A general estimate — not medical advice.

      min

      The rule used, stated plainly: about 0.5 oz of water per pound of body weight per day, plus 12 oz for every 30 minutes of exercise — the standard general guidance this estimate is built on. Heat, altitude, illness, pregnancy, and some medications all change real needs.

      Your daily target

      97 oz
      of water a day — general estimate
      85 oz from your weight + 12 oz for exercise. Not medical advice.
      In liters2.9 L
      In cups (8 oz glasses)12.1 cups
      In 16.9 oz bottles5.7 bottles
      Base (weight only)85 oz
      Added for exercise12 oz
      At 170 lb, the base target is 85 oz; 30 minutes of exercise adds 12 oz, for about 97 oz (2.9 L) across the day.

      Updates as you type — no button to press.

      How it works

      Base water = body weight (lb) × 0.5 oz
      Exercise addition = 12 oz per 30 minutes of exercise
      Daily target = base + exercise addition · 1 oz ≈ 29.6 mL

      Food counts too — fruit, vegetables, soups, and even coffee and tea all contribute water. This target is for total daily intake as a planning figure, not a rule to force down glass by glass.

      Worked example

      A 170 lb person who exercises for 30 minutes:

      Base = 170 × 0.5 = 85 oz. Exercise adds 12 oz → 97 oz for the day, which is about 2.9 liters, or a little over twelve 8 oz glasses.

      Questions

      Is the "8 glasses a day" rule the same thing?
      Eight 8 oz glasses is 64 oz — a rough one-size figure. The per-pound rule adjusts for body size, which is why a 120 lb person gets 60 oz here and a 220 lb person gets 110 oz.

      Can you drink too much water?
      Yes, though it's uncommon — forcing very large amounts in a short time is genuinely harmful. Spread intake across the day, drink to thirst around this target, and ask a clinician if you have kidney, heart, or fluid-restriction concerns.

      Estimate only — not medical advice: this is a general hydration guideline from a common rule of thumb. Your real needs depend on climate, health, and medication. If you have a condition that affects fluid intake, follow your clinician's guidance, not this page.

      Raised Bed Soil Calculator

      Bed size and depth in — soil volume out, in cubic feet and cubic yards, plus the bag count at the bag size your store actually sells.

      Units
      ft
      ft
      in
      cu ft / bag

      Soil settles and compacts after the first waterings — most gardeners fill to the top and top up later in the season. If you're ordering bulk delivery instead of bags, cubic yards is the number the supplier wants.

      Your shopping list

      43
      bags of soil to buy
      64 cu ft total, in 1.5 cu ft bags, rounded up.
      Soil per bed32 cu ft
      Total volume64 cu ft
      In cubic yards (bulk)2.37 cu yd
      In cubic meters1.81 m³

      Take to the store

      • Bags of soil1.5 cu ft bags× 43 bags
      • Or bulk deliveryLoose soil by the yard2.37 cu yd

      Updates as you type — no button to press.

      The formula

      Volume per bed = length × width × depth
      Total = volume per bed × number of beds
      Cubic yards = cubic feet ÷ 27 · Bags = total cu ft ÷ bag size, rounded up

      Depth is the depth of soil, not the height of the bed frame — a 12-inch frame usually wants about 10–11 inches of soil so the top sits just below the rim.

      Worked example

      Two beds, each 8 × 4 ft, filled 12 inches deep:

      Per bed = 8 × 4 × 1 ft = 32 cu ft. Two beds = 64 cu ft = 64 ÷ 27 = 2.37 cu yd. In 1.5 cu ft bags: 64 ÷ 1.5 = 42.7 → buy 43 bags — or order about 2.4 yards bulk.

      Questions

      Bags or bulk — which is cheaper?
      For anything over about a cubic yard, bulk delivery usually wins on price by a wide margin; below that, bags are simpler and can be carried to the bed a few at a time. This page gives you both numbers so you can compare quotes directly.

      How deep should the soil be?
      Most vegetables are happy in 10–12 inches; root crops like carrots prefer 12 or more. Shallow beds (6–8 in) work for greens and herbs.

      Estimate only: soil volumes are exact geometry; bag counts assume the bag's stated volume. Soil settles after watering, so expect to top up — and check the bag's own label for its true contents.

      Seed & Plant Spacing

      Garden size plus the spacing from your seed packet — get plants per row, number of rows, and the total plant count as a planting list, so you buy the right number of seeds or starts.

      Units
      ft
      ft
      in

      The spacing is the "thin to" or "final spacing" number on your seed packet — packets usually list a smaller sowing spacing and this larger final one. The pick-list is common packet values; your packet's number wins — type it in.

      Your planting list

      45
      plants fit in this garden
      9 per row × 5 rows at 12 in spacing.
      Plants per row9
      Rows5
      Spacing used12 in

      Planting list

      • Seeds or starts to have ready45 plants at 12 in spacing× 45

      Updates as you type — no button to press.

      How it works

      Plants per row = (garden length ÷ spacing) + 1, rounded down — a plant at each end of the row
      Rows = (garden width ÷ spacing) + 1, rounded down
      Total plants = plants per row × rows

      Planting at both ends of each row is why the count is one more than a plain division. If you prefer a margin at the edges instead, shorten the garden length and width you enter by one spacing.

      Worked example

      An 8 × 4 ft bed planted at 12 in spacing:

      Per row: 96 in ÷ 12 + 1 = 9 plants. Rows: 48 in ÷ 12 + 1 = 5 rows. Total = 9 × 5 = 45 plants — that's the count to sow (plus a few extra seeds for the ones that don't germinate).

      Questions

      Should rows be spaced wider than plants in a row?
      Often, yes — many packets give two numbers, like "12 in apart, rows 18 in apart." This tool uses one spacing both ways for simplicity; if your packet gives a wider row spacing, run it twice mentally by treating the width with the row number.

      How many extra seeds should I sow?
      A common rule is 2–3 seeds per spot for direct-sown crops, thinned to the strongest seedling. Packet germination rates are printed on the back if you want to be precise.

      Estimate only: plant counts are geometry from the spacing you enter. Germination, thinning, and variety all change the final stand — your seed packet's instructions come first.

      Fertilizer Coverage Calculator

      How many bags to buy, figured from the coverage printed on your own bag — because every product covers a different area, this calculator invents nothing.

      sq ft
      lb

      Where to find the coverage: look on the front of the bag for a line like "Covers up to 5,000 sq ft", or on the back near the spreader settings, where application rates are listed per 1,000 sq ft. Enter that number above — different fertilizers cover very different areas, so no standard value is pre-filled as fact; 5,000 is just the worked example below.

      Your shopping list

      2
      bags to buy
      7,500 sq ft ÷ 5,000 sq ft per bag = 1.5, rounded up.
      Your area7,500 sq ft
      Two bags cover10,000 sq ft
      Leftover coverage2,500 sq ft
      Two 40 lb bags cover your 7,500 sq ft, with about 2,500 sq ft of coverage to spare for a second application or a missed strip.

      Updates as you type — no button to press.

      How it works

      Bags = your area ÷ coverage per bag, rounded up to whole bags
      Leftover coverage = bags × coverage per bag − your area

      Coverage is a property of the product — its nutrient concentration and the application rate on its label — which is why it always comes from your bag and never from a generic table here.

      Worked example

      A 7,500 sq ft lawn and a bag whose label says "covers up to 5,000 sq ft":

      7,500 ÷ 5,000 = 1.5 → buy 2 bags. The two bags cover 10,000 sq ft, leaving 2,500 sq ft of coverage unused — fine to store dry for the next application.

      Questions

      Is more fertilizer better?
      No — over-applying can burn grass and washes into waterways. The label rate is the rate; this calculator's job is only to make sure you own enough bags to apply it once, evenly.

      My area is in acres.
      Switch the area unit to acres — 1 acre is 43,560 sq ft — and the bag math stays the same.

      Estimate only: bag counts come from the coverage figure you enter from your product's label. Always follow the label's application rate and safety directions — the label is the instruction, this page is just the arithmetic.

      Trip Fuel Cost Calculator

      Distance, your car's MPG, and the price at the pump — get the gallons the trip will burn and what they'll cost, split per person if you're sharing the ride.

      mi
      MPG
      $ / gal

      Your car's real MPG is on its dashboard trip computer or the window sticker's combined figure — highway-heavy trips usually beat the combined number, city driving falls short of it. Gas prices move; use the price where you'll actually fill up.

      Your trip cost

      $36.00
      total fuel cost for the trip
      300 miles at 30 MPG and $3.60 a gallon.
      Distance driven300 mi
      Gallons used10.0 gal
      Cost per mile$0.12
      300 miles ÷ 30 MPG = 10 gallons, at $3.60 a gallon that's $36.00 for the trip. Add passengers above to see the split.

      Updates as you type — no button to press.

      How it works

      Gallons used = distance driven ÷ MPG
      Total cost = gallons × price per gallon
      Cost per person = total cost ÷ (driver + passengers)

      Fuel is only part of a trip's real cost — tolls, parking, and wear on the car aren't in this number. For splitting a ride fairly, fuel is the part everyone agrees on, which is why it's the part this page figures.

      Worked example

      A 300-mile drive in a 30 MPG car with gas at $3.60:

      Gallons = 300 ÷ 30 = 10 gal. Cost = 10 × $3.60 = $36.00. With 2 passengers splitting three ways, that's $12.00 each. The same trip as a round trip doubles everything: 20 gallons, $72.00.

      Questions

      Where do I find my car's MPG?
      The dashboard's trip computer shows your actual average — the most honest number. Otherwise, the EPA combined rating for your model year is a good stand-in.

      Why did my real trip cost more?
      Detours, idling, roof cargo, cold weather, and a heavy right foot all cut real MPG below the rating. If a trip consistently costs more, lower the MPG you enter to your real-world figure.

      Estimate only: fuel cost is figured from the distance, MPG, and price you enter. Real consumption and prices vary by route, weather, and station.

      Tire Size Comparison

      Enter two tire sizes the way they're printed on the sidewall — width / aspect ratio / rim — and see each tire's true diameter and circumference, and how far apart they really are.

      Tire A — your current size

      Example: 225/65R17 is width 225, aspect 65, rim 17.

      Tire B — the size you're considering

      Same three numbers, read off the new tire's sidewall.

      The comparison

      +3.6%
      diameter difference — Tire B is taller
      Over the 3% rule-of-thumb limit — see the note in the inputs.
      Tire A diameter28.5 in (724 mm)
      Tire B diameter29.5 in (750 mm)
      Tire A circumference89.6 in
      Tire B circumference92.8 in
      Revolutions per mile — A707
      Revolutions per mile — B683
      True speed when the dash shows 60 mph62.2 mph on Tire B
      Tire B is 1.0 in taller overall. A taller tire turns fewer times per mile, so the speedometer and odometer — calibrated for Tire A — read low by the same 3.6%.

      Updates as you type — no button to press.

      How it works

      Sidewall height = width (mm) × aspect ratio %
      Diameter = rim (in × 25.4) + 2 × sidewall height
      Circumference = π × diameter · Revolutions per mile = 63,360 in ÷ circumference
      Difference = (B diameter − A diameter) ÷ A diameter

      The widely used rule of thumb: keep a replacement tire within 3% of the original diameter. Beyond that, speedometer and odometer error, gearing changes, and clearance problems all grow — this page flags it plainly when you cross it.

      Worked example

      From 225/65R17 to 245/65R17:

      Tire A: sidewall 225 × 65% = 146 mm; diameter = 432 + 293 = 28.5 in. Tire B: sidewall 159 mm; diameter = 29.5 in. Difference = +3.6% — just over the 3% guideline, and at a dash reading of 60 mph you'd really be doing about 62 mph.

      Questions

      Does width alone change the speedometer?
      Only through diameter. A wider tire with a lower aspect ratio can have the exact same diameter — that's the idea behind "plus sizing," and it's why this comparison runs on diameter, not width.

      Is the 3% rule a law?
      No — it's the tire industry's common rule of thumb for keeping speedometer error and gearing changes small. Your vehicle's maker and a tire shop can confirm what fits your specific car, including clearance.

      Estimate only: diameters are computed from the nominal sidewall numbers; actual tires vary slightly by brand and wear. Fitment — clearance, load rating, gearing — is a decision for your vehicle's maker or a tire professional.

      EV Charging Cost Calculator

      Battery size, where the charge starts and ends, and your electricity rate — get the cost of one charge, and what your monthly miles cost to drive electric.

      kWh
      $ / kWh
      %
      %
      mi
      mi / kWh

      The rate starts at $0.17/kWh — roughly the recent US average residential electricity price — as an editable starting value. Your bill's per-kWh rate (delivery included) is the number to use; time-of-use plans can make overnight charging much cheaper.

      Your charging cost

      $6.12
      to charge from 20% to 80%
      36.0 kWh at $0.17 per kWh.
      Energy added per charge36.0 kWh
      Cost per charge$6.12
      Energy for your monthly miles286 kWh
      Monthly charging cost$48.57
      Cost per mile$0.05
      Charging a 60 kWh battery from 20% to 80% adds 36 kWh and costs $6.12 at home rates. Driving 1,000 miles a month at 3.5 mi/kWh runs about $48.57 a month.

      Updates as you type — no button to press.

      How it works

      kWh per charge = battery size × (target % − current %) ÷ 100
      Cost per charge = kWh × your rate
      Monthly kWh = monthly miles ÷ efficiency (mi/kWh) · Monthly cost = monthly kWh × rate

      Real charging isn't perfectly efficient — roughly 5–15% of the energy is lost as heat in the charger and battery, so a home meter would show a little more than the battery receives. Public fast chargers also price very differently from home electricity.

      Worked example

      A 60 kWh battery charged from 20% to 80% at $0.17/kWh:

      Energy = 60 × 60% = 36 kWh. Cost = 36 × $0.17 = $6.12. Monthly: 1,000 miles ÷ 3.5 mi/kWh = 286 kWh → $48.57 a month, about 5 cents a mile.

      Questions

      Why charge only to 80%?
      Charging slows sharply above 80%, and keeping a battery between roughly 20% and 80% is the common guidance for everyday longevity. Road trips are the usual exception — charge to what the trip needs.

      How does this compare with gas?
      Run the same monthly miles through the Trip Fuel Cost calculator with your old car's MPG and local gas price — most drivers find home charging lands at a third to a half of the fuel cost per mile.

      Estimate only: charging costs are figured from the battery size, percentages, efficiency, and rate you enter, before charging losses. Your utility's actual billed rate and your car's real efficiency decide the true cost.

      Dog Food Portions

      How much to feed each day, from your dog's weight, life stage, and the calories printed on your food's bag. An estimate — your food's label and your vet have the final word.

      lb
      kcal / cup

      Where to find calories per cup: on the bag's nutrition panel, in the "Calorie Content" line — it reads something like "3,600 kcal/kg · 350 kcal/cup." Foods vary a lot (roughly 300–450 kcal/cup), which is why the number comes from your bag, not a table here. The ×factors are the standard multipliers vets apply to a dog's resting calorie needs.

      Daily portion — estimate

      3 ⅓ cups
      of food per day
      About 1,164 calories a day for a 50 lb adult dog. Estimate — follow your food's label and your vet.
      Calories per day1,164 kcal
      Resting needs (RER)727 kcal
      Per meal, 2 meals a day1 ⅔ cups
      Per meal, 3 meals a day1⅛ cups
      A 50 lb spayed/neutered adult needs roughly 1,164 kcal a day; at 350 kcal per cup, that's about 3 ⅓ cups — split across meals however your dog does best.

      Updates as you type — no button to press.

      How it works

      Resting energy (RER) = 70 × (weight in kg)0.75 — the standard veterinary formula
      Daily calories = RER × life-stage factor
      Cups per day = daily calories ÷ your food's kcal per cup

      Treats count. The common guidance is that treats should stay under about 10% of daily calories — if your dog gets a lot of them, take the difference out of the bowl.

      Worked example

      A 50 lb (22.7 kg) spayed adult, food at 350 kcal/cup:

      RER = 70 × 22.70.75 ≈ 727 kcal. Daily = 727 × 1.6 ≈ 1,164 kcal. Cups = 1,164 ÷ 350 ≈ 3 ⅓ cups a day, or about 1 ⅔ cups at each of two meals.

      Questions

      My dog is gaining (or losing) on this amount. Now what?
      Adjust by about 10% at a time and re-weigh in 2–3 weeks. The formula is a starting point; the dog in front of you — ribs easy to feel but not see, a visible waist — is the real measure.

      What about a senior dog?
      Healthy seniors usually land near the "less active" factor, but age alone doesn't set calories. If your senior is losing weight or muscle, that's a vet conversation, not a bigger scoop.

      Estimate only: portions come from the standard veterinary RER formula and the calories per cup you enter. Follow your food's own feeding label, adjust for your dog's body condition, and ask your vet about puppies, pregnancy, illness, or weight problems.

      Cat Food Portions

      How much to feed each day, from your cat's weight, lifestyle, and the calories printed on your food's bag. An estimate — your food's label and your vet have the final word.

      lb
      kcal / cup

      Where to find calories per cup: on the bag or can's nutrition panel, in the "Calorie Content" line — for example "3,800 kcal/kg · 360 kcal/cup." Wet food is usually listed per can instead; if you feed wet, divide the daily calories below by the kcal per can on the label. The ×factors are the standard multipliers vets apply to a cat's resting calorie needs.

      Daily portion — estimate

      ¾ cup
      of food per day
      About 261 calories a day for a 10 lb indoor cat. Estimate — follow your food's label and your vet.
      Calories per day261 kcal
      Resting needs (RER)218 kcal
      Per meal, 2 meals a day⅜ cup
      A 10 lb indoor spayed/neutered cat needs roughly 261 kcal a day; at 360 kcal per cup, that's about ¾ cup a day — most cats do best with it split into two meals.

      Updates as you type — no button to press.

      How it works

      Resting energy (RER) = 70 × (weight in kg)0.75 — the standard veterinary formula
      Daily calories = RER × lifestyle factor
      Cups per day = daily calories ÷ your food's kcal per cup

      Indoor cats are famously easy to overfeed — a heaped "cup" can hold 30% more than a level one. Weighing the food in grams for a week is the fastest way to learn what your scoop really holds.

      Worked example

      A 10 lb (4.5 kg) indoor neutered cat, food at 360 kcal/cup:

      RER = 70 × 4.50.75 ≈ 218 kcal. Daily = 218 × 1.2 ≈ 261 kcal. Cups = 261 ÷ 360 ≈ ¾ cup a day.

      Questions

      Kittens?
      Kittens eat far more per pound than adults and need kitten food — this calculator's factors are for adult cats. Follow your kitten food's label and your vet's schedule instead.

      My cat begs constantly. Is it hunger?
      Often it's habit, boredom, or a meal schedule the cat has trained you into. If weight and body condition are right, the portion is right — puzzle feeders and play spread the same calories over more of the day.

      Estimate only: portions come from the standard veterinary RER formula and the calories per cup you enter. Follow your food's own feeding label, adjust for your cat's body condition, and ask your vet about kittens, pregnancy, illness, or weight problems.

      Dog Crate Size

      Two measurements of your dog — get the minimum crate size and the common crate size to buy. A sizing guide: big enough to stand, turn, and lie flat; not so big it stops feeling like a den.

      Units
      in
      in

      The sizing guide used: crate length = dog's length + 4 in, crate height = dog's height + 4 in — the standard "add 2–4 inches" guidance, using the roomy end. Crates are sold in standard lengths (18, 24, 30, 36, 42, 48 in), so the recommendation is the smallest standard size that clears your dog's minimum. For a puppy, buy for the expected adult size and block off the extra space with the divider most crates include.

      Crate to buy — sizing guide

      30 in
      crate — the common size to buy
      Smallest standard crate that fits a 24 in long, 20 in tall dog.
      Minimum crate length28 in (71 cm)
      Minimum crate height24 in (61 cm)
      Size nameMedium — 30 in
      Your dog needs at least 28 in of length and 24 in of height. Standard crates jump from 24 to 30 in, so the 30 in (Medium) crate is the buy.

      Updates as you type — no button to press.

      How it works

      Minimum crate length = dog's length + 4 in
      Minimum crate height = dog's height + 4 in
      Buy = the smallest standard size (18 · 24 · 30 · 36 · 42 · 48 in) at or above the minimum length, with height to match

      Crate heights grow with length in standard sizing, so length is normally the deciding measurement. If your dog is unusually tall for its length — a greyhound build — check the chosen crate's listed height against your minimum before buying.

      Worked example

      A dog measuring 24 in long and 20 in tall:

      Minimum length = 24 + 4 = 28 in; minimum height = 20 + 4 = 24 in. The 24 in crate is too short, so the size to buy is the 30 in crate.

      Questions

      Is bigger always better?
      For house-training, no — a crate much larger than the dog lets a puppy sleep at one end and toilet at the other. For an adult dog's everyday den, one size up from the minimum is harmless comfort.

      What about airline travel?
      Airlines set their own kennel rules, usually requiring the dog to stand without its ears touching the top, with specific kennel construction. Treat this page as home-crate sizing and check your airline's pet policy before flying.

      Sizing guide only: crate recommendations follow the standard add-2–4-inches guidance and common crate sizes. Measure your own dog, check the specific crate's listed interior dimensions, and ask your vet or trainer about crate training itself.

      Appliance Running Cost

      What one appliance really costs you — per day, per month, and per year — from its watts, how long it runs, and your electricity rate.

      W
      hrs
      $ / kWh

      Real watts are printed on the appliance's label or plug — a space heater is usually exactly 1,500 W on high, while a fridge cycles on and off, so its average draw is well under its label figure. Hours per day is running time, not plugged-in time.

      What it costs to run

      $38.25
      per month
      1,500 W for 5 hrs a day at $0.17/kWh.
      Energy per day7.5 kWh
      Cost per day$1.28
      Cost per month (30 days)$38.25
      Cost per year$465.38
      A 1,500 W space heater run 5 hours a day uses 7.5 kWh daily — $1.28 a day, $38.25 a month, $465.38 a year at $0.17/kWh. Heaters and air conditioners dominate home energy bills for exactly this reason.

      Updates as you type — no button to press.

      How it works

      Energy per day (kWh) = watts × hours per day ÷ 1,000
      Cost = kWh × your rate · Month = 30 days · Year = 365 days

      A kilowatt-hour is simply 1,000 watts running for one hour — it's the unit your bill charges for, which is why watts and hours are all this calculation needs.

      Worked example

      A 1,500 W space heater, 5 hours a day, at $0.17/kWh:

      Energy = 1,500 × 5 ÷ 1,000 = 7.5 kWh a day. Cost = 7.5 × $0.17 = $1.28 a day — $38.25 a month and $465.38 a year if it ran like that daily.

      Questions

      Where's my electricity rate?
      On your bill, divide the total electric charge by the kWh used for a true all-in rate, or find the per-kWh line items and add supply + delivery. Rates vary enormously by state — roughly 11¢ to over 40¢ — which is why the average here is only a starting value.

      Why is my fridge's label higher than 150 W?
      The label shows the maximum draw when the compressor runs. A fridge cycles, so its average is much lower — 150 W averaged across the day is the typical planning figure.

      Estimate only: costs come from the watts, hours, and rate you enter, with typical watts labeled as typical. Cycling appliances and time-of-use rates make real bills vary — your meter and your bill are the final word.

      Home Energy List

      Add the appliances in your home — name, watts, hours a day — and get one ranked list by monthly cost, with the total. The fastest way to see what your electric bill is actually made of.

      $ / kWh

      Your appliances

      Watts are on each appliance's label; hours are the time it actually runs each day.

      Ranked by monthly cost

      $58.65
      total per month for everything listed
      About $703.80 a year at $0.17/kWh.

      Biggest first

        Updates as you type — no button to press.

        How it works

        Each appliance: monthly cost = watts × hours/day × 30 ÷ 1,000 × rate
        The list sorts most expensive first; the total is every appliance added together

        Ranking is the point: in most homes two or three loads — heating, cooling, hot water, a dryer — are most of the bill, while the phone chargers everyone worries about cost pennies a year.

        Worked example

        The three appliances above, at $0.17/kWh:

        Space heater: 1,500 × 5 × 30 ÷ 1,000 × $0.17 = $38.25/mo. Refrigerator: 150 × 24 hrs = $18.36/mo. TV: $2.04/mo. Total: $58.65 a month — and the heater alone is nearly two-thirds of it.

        Questions

        What about things that are always plugged in?
        Standby draw is real but small — typically 1–5 W per device. Add a row called "standby & chargers" at, say, 25 W for 24 hrs (about $3 a month) if you want it on the list; it's rarely where the money is.

        My total is way below my bill. What's missing?
        Usually the big fixed loads: water heater, oven, dryer, HVAC, well pump, pool pump. Add those with honest hours and the list closes in on the bill fast.

        Estimate only: monthly costs come from the watts, hours, and rate you enter. Cycling appliances (fridges, HVAC) run fewer hours than they're plugged in — honest running hours make an honest list.

        Light Bulb Savings

        What your current bulbs cost to run for a year, what the same light from LEDs would cost, and the difference — the number that tells you whether switching pays.

        W
        W
        hrs
        $ / kWh

        Match bulbs by light, not watts: an LED making the same light as a 60 W incandescent (about 800 lumens) typically draws 8–10 W. The lumens number is printed on both boxes.

        Your yearly savings

        $158.23
        saved every year by switching
        10 bulbs, 5 hours a day, at $0.17/kWh.
        Old bulbs — cost per year$186.15
        LEDs — cost per year$27.92
        Savings per bulb per year$15.82
        Energy saved per year931 kWh
        Ten 60 W bulbs burning 5 hours a day cost $186.15 a year; the same light from 9 W LEDs costs $27.92. The switch saves $158.23 a year — most LED bulbs pay for themselves in a few months at these hours.

        Updates as you type — no button to press.

        How it works

        Yearly cost = watts × bulbs × hours/day × 365 ÷ 1,000 × rate
        Savings = old yearly cost − LED yearly cost

        Hours matter as much as watts: a bulb in a closet used ten minutes a day saves almost nothing, while the kitchen lights earn their replacement cost back fastest. Switch the most-used bulbs first.

        Worked example

        Ten bulbs, 60 W → 9 W LED, 5 hours a day, $0.17/kWh:

        Old: 60 × 10 × 5 × 365 ÷ 1,000 = 1,095 kWh → $186.15/yr. LED: 164 kWh → $27.92/yr. Savings: $158.23 a year, about $15.82 per bulb.

        Questions

        What about the cost of the LED bulbs themselves?
        Not subtracted here, because prices vary — but at roughly $15.82 saved per bulb per year in this example, even a $5 bulb is ahead within four months. Bulbs used an hour a day take proportionally longer.

        Do LEDs really last longer?
        Rated life is typically 15,000–25,000 hours against about 1,000 for incandescent — at 5 hours a day that's 8–13 years between changes, which is its own saving in bulbs not bought.

        Estimate only: savings come from the watts, hours, bulb count, and rate you enter, before the purchase price of the new bulbs. Actual use patterns decide the real figure.

        Days Between Dates

        Pick any two dates — get the exact number of days between them, and the same span expressed in weeks, approximate months, and years. Figured on your device's own calendar; nothing leaves your browser.

        Order doesn't matter — the count is the same either way, and the result says which date is earlier. The count is the number of midnights between the two dates, the standard way date differences are measured (it doesn't count the start day itself).

        The span

        30
        days between the two dates
        Counted on your local calendar.
        In weeks4 weeks, 2 days
        In months (approximate)1.0 months
        In years0.08 years
        Pick two dates to see the span.

        Updates as you type — no button to press.

        How it works

        Days = end date − start date, counted in whole days on your local calendar
        Weeks = days ÷ 7 · Months ≈ days ÷ 30.44 (the average month) · Years = days ÷ 365.25 (leap years included)

        Months are labeled approximate because real months run 28 to 31 days — there is no exact "months between dates" without naming the specific months, which the years/months/days breakdown in the Age Calculator does instead.

        Worked example

        From January 1, 2026 to December 31, 2026:

        That's 364 days — 52 weeks exactly, about 12.0 months, or 1.00 years minus a day. (January 1 to the next January 1 is 365 days in a non-leap year like 2026.)

        Questions

        Why doesn't it count both end days?
        Date differences measure the gap between two points — the same convention your calendar and every spreadsheet use. If you need an inclusive count (both the first and last day counted, like hotel nights vs. days), add 1.

        What about leap years?
        Counted exactly — the day count walks your real calendar, so a span crossing February 29 includes it.

        Please note: day counts use your device's local calendar and time zone. Month and year figures are conversions of the exact day count, labeled approximate where the calendar makes them so.

        Workdays Between Dates

        How many working days are actually in a span — Mondays to Fridays counted, weekends excluded, and any holidays you enter subtracted. Counted on your device's own calendar.

        days

        Both endpoints are included — a Monday-to-Friday span counts 5. Holiday lists differ by country, state, and employer, so you enter the count for yours rather than this page guessing which holidays you get.

        Working days

        10
        workdays in the span
        Weekends excluded, holidays subtracted.
        Total calendar days14 days
        Weekdays (Mon–Fri)10
        Weekend days4
        Holidays subtracted0
        Pick two dates to count the workdays between them.

        Updates as you type — no button to press.

        How it works

        The span is walked day by day on your local calendar: each Monday–Friday counts as a weekday, Saturdays and Sundays as weekend days
        Workdays = weekdays − holidays you enter

        Walking the calendar — rather than dividing by 7 — is what makes the count exact across month boundaries, daylight-saving changes, and leap days.

        Worked example

        Monday, November 2, 2026 through Friday, November 13, 2026:

        That's two full working weeks: 10 weekdays, 4 weekend days, 14 calendar days total. With no holidays entered, the answer is 10 workdays. A holiday falling on one of those weekdays — entered above — brings it to 9.

        Questions

        Why do I enter holidays myself?
        Because there's no single list: federal, state, school, and company holidays all differ, and many shift when they land on a weekend. Counting the weekday holidays inside your span takes a glance at your own calendar and keeps the answer honest.

        Does it count a half day or a deadline day?
        Every weekday in the span counts as a full workday, endpoints included. If a deadline convention excludes the final day, subtract 1.

        Please note: weekday and weekend counts use your device's local calendar. Whether a specific day counts as a workday for a deadline, contract, or court rule depends on that rule's own definition — this page does the calendar arithmetic only.

        Age Calculator

        An exact age — years, months, and days — from a date of birth, plus total days lived and how long until the next birthday. The "as of" date starts at today, on your device's clock.

        Exact ages matter more often than you'd think — school cutoffs, eligibility dates, "you must be 18 by…" rules. Months and days are counted on the real calendar, so a February birthday in a leap year is handled properly.

        The age

        36 years
        5 months, 2 days
        As of today.
        Total days13,306 days
        Next birthdayJune 15, 2027
        Days until it210 days
        Born June 15, 1990 — 36 years, 5 months, and 2 days old today.

        Updates as you type — no button to press.

        How it works

        Years = full years from the birth date to the as-of date
        Months = full calendar months since the last birthday
        Days = the remaining days, counted on the real calendar (leap days included)
        Next birthday = the coming anniversary of the birth date

        A February 29 birthday is treated as arriving on March 1 in non-leap years for the "next birthday" count — the convention most forms and systems use; some use February 28 instead.

        Worked example

        Born June 15, 1990, as of November 17, 2026:

        The 36th birthday was June 15, 2026. From there to November 15 is 5 full months, plus 2 days → 36 years, 5 months, 2 days. The next birthday, June 15, 2027, is 210 days away.

        Questions

        Why months and days, not just years?
        Because plenty of rules turn on them — a child who is "5 years 11 months" misses a September school cutoff that "6 years" makes. Exact age removes the guesswork.

        Can I calculate an age on a past or future date?
        Yes — change the "as of" date to any day: a wedding date, a school cutoff, a retirement date. A date of birth after the as-of date simply shows that no age exists yet.

        Please note: ages are counted on your device's local calendar. Official eligibility decisions rest with the organization applying its own rule — this page gives you the exact count to check against it.

        About OneTripCalc

        Free Home & DIY calculators that end in a shopping list — and the thinking behind them.

        What OneTripCalc is

        OneTripCalc is a set of free Home & DIY calculators built around one idea: a calculator should end in a shopping list, not just a number. Every tool here works out the material for a project — paint, tile, concrete, lumber, roofing, insulation, and more — then rounds it up to the whole gallons, boxes, bags, and boards you actually buy, with a waste margin you can see and adjust.

        How the estimates work

        Each calculator shows its formula and a worked example under the results, so you can check the math yourself before you spend anything. Results update as you type, and every measurement can be switched between imperial and metric in place — what you typed converts instead of clearing.

        What it is not

        These are planning estimates for buying material. They are not structural engineering, and they are not building-code advice. For load-bearing work, permits, electrical, plumbing, or anything an inspector will sign off on, check your local code and a licensed professional.

        The calculators

        Home & DIY: Paint · Square Footage · Tile · Flooring · Concrete · Drywall · Wallpaper · Carpet · Mulch · Bulk Material · Paver · Fence · Deck · Roofing · Stair · Stud & Framing · Board Foot · Baseboard & Trim · Grout & Backsplash · Insulation.

        Money math: Loan Payoff · Savings Goal · Hourly-to-Salary. These are general-math estimates, not financial advice.

        School & Grades: Weighted Grade · Group Maker · Rubric Points Converter.

        Cooking & kitchen: Recipe Scaler · Roast Cooking Time · Baker's Percentage.

        Health & body: Calorie Needs (TDEE) · Running Pace · Daily Water Intake. Every result is a labeled estimate, not medical advice.

        Garden & outdoors: Raised Bed Soil · Seed & Plant Spacing · Fertilizer Coverage.

        Car & travel: Trip Fuel Cost · Tire Size Comparison · EV Charging Cost.

        Pets: Dog Food Portions · Cat Food Portions · Dog Crate Size. Portions are estimates — your food's label and your vet have the final word.

        Home energy: Appliance Running Cost · Home Energy List · Light Bulb Savings.

        Dates & time: Days Between Dates · Workdays Between Dates · Age Calculator.

        Privacy Policy

        How this site handles your information — in plain language.

        The short version

        The calculators on this site run entirely in your browser. What you type — room sizes, measurements, project details — is never sent to us, never stored on a server, and there are no accounts to create and no forms that collect your information.

        What we collect

        Nothing about your projects. Like most websites, the hosting provider may record standard technical logs (such as pages requested and browser type) for security and reliability, and we may use privacy-respecting aggregate analytics to see which calculators are popular so we know what to improve.

        Analytics

        We use Google Analytics to count visits and see which calculators and features get used, so we know what to improve. It records counts only — it never receives the numbers or text you type into a calculator; those stay on your own device. You can read more in Google's Privacy Policy.

        Advertising and cookies

        This site is supported by advertising. When ads are shown, they are served by Google AdSense, which may use cookies to serve ads based on your prior visits to this and other websites. You can opt out of personalized advertising in Google's Ads Settings, and you can block or clear cookies at any time in your browser settings — the calculators will keep working either way.

        Email

        If you email us, we will only use your address to reply to you. We do not sell, rent, or share email addresses, and there is no mailing list to be added to.

        Changes and contact

        If this policy changes, the updated version will be posted on this page. Questions about privacy can be sent to contact@onetripcalc.com.

        Contact

        One email address, read by the person who builds the calculators.

        Email us

        The one address for everything:

        contact@onetripcalc.com

        What to write about

        A calculator result that looks wrong (tell us the calculator and the measurements you entered — the formula and worked example under each calculator show the math we use), a material or project you wish had a calculator, a typo or a broken link, or anything else about the site.

        What we can't do by email

        We can't advise on your specific project's structure, permits, or code compliance — that needs your local building department or a licensed professional. And because the calculators run entirely in your browser, there is no account or saved data for us to look up, reset, or delete.

        We read everything and reply to most messages within a few days.

        My Project

        Every calculator you add lands here — grouped by calculator, then merged into one combined list for the trip.

        Tap the name to rename it — for example, “Bathroom remodel.” Your project is saved in this browser only, on this device.

        Nothing here yet

        Open any calculator, type your numbers, and tap Add to project under its results — its shopping list (or its headline result) will appear here.

        Browse the categories →